規格
ProRack?系列機架箱沒有避震塊。機架框架直接安裝在機箱上
派力肯機架箱屬于定制化產品，在您采購前請務必與工程師進行詳細、充分的技術溝通
尺寸
機架深度
重量
PR2026-01/18/01
14U
45.7 cm
16.5 kg
PR2018-01/18/01
10U
45.7 cm
17.7 kg
PR2015-01/18/01
8U
45.7 cm
12.4 kg
PR2012-01/18/01
6U
45.7 cm
10.8 kg
PR2008-01/18/01
4U
45.7 cm
9.5 kg
Black Oxide Plated Stainless Steel
Upgrade to black oxide coated stainless steel for corrosion resistant hardware.
Lift/Tie Down Rings
Black plated Stainless Steel (1000lb/ring rating) for Hoisting/tie down points, 2" (50 mm) diameter clearance for hooks, spring loaded, pivots 180 degrees.
Custom Stenciling
Per MIL-I-43553, Black, White, Yellow. One color per case.
Front Labels
A set of two labels
Standard Labels
Standard case labels
Caster Storage
Holds four (4) casters on one (1) machined aluminum extrusion with mounting hardware (5" lid only).
Caster storage is not available in rear lid when when pouch is chosen in rear lid.
Drawers
19" rack-mountable with drawer slides, 14 inches (356 mm) deep, key lockable. Available in 2U, 3U, and 4U heights. U = 1.75 (44.45mm).
Sliding Shelves
Fixed and sliding shelves available. (35 lbs. per shelf)
Keyboard Tray
Comfortable standard size keyboard. 24" (610 mm) wide, 12 inches (305 mm) deep. Attaches to case front catches.
Locking Swivel Casters
Button release QuickClip™ swivel casters, removable or fixed, 3.5" or 5.0" wheel diameters.
Locking Removable 3.5" and 5" Bottom Casters
Enhances the bottom panel strength of rack cases, while providing button release of swivel casters. Choice of 3.5" or 5.0" wheel diameters
Bolt-On Edge Casters
Two (2) bolt on edge casters on the bottom edge of the case for cart-like movement. Load limit is 75lbs/wheel 150lbs gross case weight.<
Mold-In Edge Casters
Two (2) mold-in edge casters bolted through the case on the bottom edge of the case for cart-like movement. Load limit is 75lbs/wheel, 150lbs gross case weight.
Lid Storage Pouch
Zippered pouch for storing cables and accessories in front and/or rear lids. Requires a 5" lid. Pouch not available in 5" rear lid when caster storage option is chosen.
Card Holder
Metal holders for shipping cards. Choose from either 2-3/8" x 5-3/8" (60 x 136 mm) or 4" x 6", (102 x 152 mm). Ask which card holder size(s) fits your desired rack case.
Pressure Relief Valve (PRV) with Closed Loop Gasket
The manual PRV button is used to maintain correct pressure differential. Pressure range: +/- 0.5 PSID
Lockable Cable Catch
One (1) set of four (4) cables per case. Allows the case to be padlocked shut. The cable is made of tamper-resistant aircraft steel. Padlock Not Included.
Coupling Catches
Built in attachment system latching one case to another for secure stacking
Adjustable Vertical Supports
These aluminum supports installed onthe side walls of the rack, top to bottom.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Fixed Bottom Support Rails
These aluminum supports installed on the bottom of the rack, front to back.
Adjustable Horizontal Supports
These aluminum supports installed on the side of the rack, front to back.
Removable Rack System
This option is only available on Classic Racks and SuperMAC™ racks.
Shock Mount System
Cylindrical Shock Mounts isolate equipment from vibration and manage the impact to the rack mounted equipment from drop forces. Rack cases commonly use 8 shock mounts that vary in weight ratings depending on the protection requirements - from delicate equipment to rugged electronics.
Shock Isolation Mounts
Patent pending shock mount design made of a heavy-duty rubber that is inserted into the case body at the corners to provide a flexible, shock absorbing attachment for the rack frame.
The heavy duty shock system is used on Peli Classic Rack case models with payload weights from 160 lbs (72.6kg) to 340 lbs (154.2 kg).
Cobalt Black Plated Handles
90° stop handle.
3-hole: 35 lb. lift/handle
4-hole: 150 lb. lift/handle
Lid Hangers
Store lids on side of case when case is open. Set of four (4) hangers for two lids.
